DJI A2 Installation

1. What You Need

To get started you will need the DJI A2 Flight Controller system, your Flytrex Live 3G and the Flytrex CAN-BUS Adapter. The CAN-BUS Adapter includes both the adapter and cable seen in the picture (supplied cable is all black). When ordering Flytrex Live you will be asked which cable/adapter you wish to include with your order, make sure to select the Flytrex CAN-BUS Adapter.

2. A2 Setup

Before installing Flytrex Live 3G you should have your DJI A2 flight controller setup according to DJI guidelines. The picture below shows our A2 flight controller setup. The A2 components can be connected in different order as well - this won’t have any affect on your Live 3G installation.

3. Connecting Flytrex Live 3G

Connect the Flytrex CAN-BUS Adapter built-in cable to any CAN-BUS socket available on your A2 setup. In the picture below we connected the adapter to the iOSD socket. Now connect the supplied CAN-BUS installation cable between the small CAN-BUS adapter socket and the matching socket on the Live 3G (the supplied cable is all black and not colored as seen in the picture). Both sides of the cable are identical and it can be connected either way.

Before flying make sure to register your Flytrex Live 3G and you’re all set!